Sawyer Filters in Emergency Situations
Sawyer Filters in Emergency Situations
Sawyer Filters in Emergency Situations
If you are in a location advising a boil alert, Sawyer filters will make that water safe for consumption.
All Sawyer water filters are .1 microns absolute and will remove harmful bacteria, parasites, cysts, and any other particulate or biological pathogen larger in size.
Floodwater
If you are in a flood affected area, surface water can absolutely be contaminated with sewage or other contaminants, so exercise caution where you are sourcing your water.
Bacteria and Sewage
The primary contaminant in floodwater is bacteria from sewage and other decaying organic matter. Our filters remove 99.99999% of bacteria, including those common in floodwater, like Escherichia coli (E. coli), Salmonella, Campylobacter, and Leptospira.
Gasoline and Fuels
Contaminants like gasoline or other fuels are lighter than water and will rise to the surface so if this is your only water source, draw your water 12" below the surface. If you still have concerns about taste, smell, or discoloration, go lower or seek alternative water options.
Viruses
Viruses are not typically found in water in these situations. Viruses are typically airborne or need warm water and/or a host to survive.
Saltwater
Sawyer filters are not for use with salt water, proceed to fresh water sources like lakes, streams, etc.
Our Systems
Our Gravity Systems and Bucket Systems are ideal for groups or families.
Tap Filters are ideal for locations where plumbing is still active.
Squeeze, MINI, and Micro filters can also easily be used for individuals or converted to gravity systems.
How to Clean
The key to a successful backwash is to be forceful. A good backwash after every use can restore up to 98% of the original flow rate of your filter.
Step 1
Remove the cap from the drinking side of the filter.
Step 2
Fill the cleaning plunger with clean water.
Step 3
Press it against the drinking side of the filter, opposite the direction of flow.
Step 4
Forcefully push the water through the filter fibers using the plunger.
Repeat Steps 2 - 4 until the water comes through clear and easily.
How to Store
If you’ve stored a dirty filter... it can usually be salvaged. Soak it in hot water, let it sit for a few days, then forcefully backwash the filter.
Step 1
Backwash your filter before storing it.
Step 2
Sanitize the filter element to kill any microorganisms that may remain inside your filter. To do this, backwash your filter with a diluted bleach solution made using one capful of fragrance- free bleach per liter of water.
Step 3
Allow the filter to dry and store in a temperature-controlled environment, because no one wants a frozen filter.
Estanda a Sawyer
Responding to a disaster situation?
Please email customer@sawyer.com to learn more about using Sawyer Filters in emergency situations.
Lòt Resous
Please visit sawyer.com/help.
Fondasyon an Sawyer
We partner with over 140 organizations in 80+ countries to bring solutions to those lacking access to clean water. Learn more and donate by visiting the Sawyer Foundation.
If you are in a location advising a boil alert, Sawyer filters will make that water safe for consumption.
All Sawyer water filters are .1 microns absolute and will remove harmful bacteria, parasites, cysts, and any other particulate or biological pathogen larger in size.
Floodwater
If you are in a flood affected area, surface water can absolutely be contaminated with sewage or other contaminants, so exercise caution where you are sourcing your water.
Bacteria and Sewage
The primary contaminant in floodwater is bacteria from sewage and other decaying organic matter. Our filters remove 99.99999% of bacteria, including those common in floodwater, like Escherichia coli (E. coli), Salmonella, Campylobacter, and Leptospira.
Gasoline and Fuels
Contaminants like gasoline or other fuels are lighter than water and will rise to the surface so if this is your only water source, draw your water 12" below the surface. If you still have concerns about taste, smell, or discoloration, go lower or seek alternative water options.
Viruses
Viruses are not typically found in water in these situations. Viruses are typically airborne or need warm water and/or a host to survive.
Saltwater
Sawyer filters are not for use with salt water, proceed to fresh water sources like lakes, streams, etc.
Our Systems
Our Gravity Systems and Bucket Systems are ideal for groups or families.
Tap Filters are ideal for locations where plumbing is still active.
Squeeze, MINI, and Micro filters can also easily be used for individuals or converted to gravity systems.
How to Clean
The key to a successful backwash is to be forceful. A good backwash after every use can restore up to 98% of the original flow rate of your filter.
Step 1
Remove the cap from the drinking side of the filter.
Step 2
Fill the cleaning plunger with clean water.
Step 3
Press it against the drinking side of the filter, opposite the direction of flow.
Step 4
Forcefully push the water through the filter fibers using the plunger.
Repeat Steps 2 - 4 until the water comes through clear and easily.
How to Store
If you’ve stored a dirty filter... it can usually be salvaged. Soak it in hot water, let it sit for a few days, then forcefully backwash the filter.
Step 1
Backwash your filter before storing it.
Step 2
Sanitize the filter element to kill any microorganisms that may remain inside your filter. To do this, backwash your filter with a diluted bleach solution made using one capful of fragrance- free bleach per liter of water.
Step 3
Allow the filter to dry and store in a temperature-controlled environment, because no one wants a frozen filter.
Estanda a Sawyer
Responding to a disaster situation?
Please email customer@sawyer.com to learn more about using Sawyer Filters in emergency situations.
Lòt Resous
Please visit sawyer.com/help.
Fondasyon an Sawyer
We partner with over 140 organizations in 80+ countries to bring solutions to those lacking access to clean water. Learn more and donate by visiting the Sawyer Foundation.
If you are in a location advising a boil alert, Sawyer filters will make that water safe for consumption.
All Sawyer water filters are .1 microns absolute and will remove harmful bacteria, parasites, cysts, and any other particulate or biological pathogen larger in size.
Floodwater
If you are in a flood affected area, surface water can absolutely be contaminated with sewage or other contaminants, so exercise caution where you are sourcing your water.
Bacteria and Sewage
The primary contaminant in floodwater is bacteria from sewage and other decaying organic matter. Our filters remove 99.99999% of bacteria, including those common in floodwater, like Escherichia coli (E. coli), Salmonella, Campylobacter, and Leptospira.
Gasoline and Fuels
Contaminants like gasoline or other fuels are lighter than water and will rise to the surface so if this is your only water source, draw your water 12" below the surface. If you still have concerns about taste, smell, or discoloration, go lower or seek alternative water options.
Viruses
Viruses are not typically found in water in these situations. Viruses are typically airborne or need warm water and/or a host to survive.
Saltwater
Sawyer filters are not for use with salt water, proceed to fresh water sources like lakes, streams, etc.
Our Systems
Our Gravity Systems and Bucket Systems are ideal for groups or families.
Tap Filters are ideal for locations where plumbing is still active.
Squeeze, MINI, and Micro filters can also easily be used for individuals or converted to gravity systems.
How to Clean
The key to a successful backwash is to be forceful. A good backwash after every use can restore up to 98% of the original flow rate of your filter.
Step 1
Remove the cap from the drinking side of the filter.
Step 2
Fill the cleaning plunger with clean water.
Step 3
Press it against the drinking side of the filter, opposite the direction of flow.
Step 4
Forcefully push the water through the filter fibers using the plunger.
Repeat Steps 2 - 4 until the water comes through clear and easily.
How to Store
If you’ve stored a dirty filter... it can usually be salvaged. Soak it in hot water, let it sit for a few days, then forcefully backwash the filter.
Step 1
Backwash your filter before storing it.
Step 2
Sanitize the filter element to kill any microorganisms that may remain inside your filter. To do this, backwash your filter with a diluted bleach solution made using one capful of fragrance- free bleach per liter of water.
Step 3
Allow the filter to dry and store in a temperature-controlled environment, because no one wants a frozen filter.
Estanda a Sawyer
Responding to a disaster situation?
Please email customer@sawyer.com to learn more about using Sawyer Filters in emergency situations.
Lòt Resous
Please visit sawyer.com/help.
Fondasyon an Sawyer
We partner with over 140 organizations in 80+ countries to bring solutions to those lacking access to clean water. Learn more and donate by visiting the Sawyer Foundation.
Popular posts
Recent articles
Other categories
You might also like
.png)
Medya Mansyone
Medya Mansyone
Stand aside celebrity-endorsed sandwich franchises; there’s a new power partnership in town.
Medya Mansyone
Families and communities around the world - currently over 2.2 billion people - are without access to clean water. This Giving Tuesday Sawyer will be matching all donations made to help fund this life-saving work.
